This series of gas detector can measure the concentration of combustible gas on site.

The detector is programmed and controlled by infrared remote control, and outputs standard 4-20mA signals proportional to the gas concentration. This product adopts 4-digit digital tube display, which can ensure clear display in strong sunlight and low temperature environment of -40 ℃.

This product meets the following standard：

∗ GB 15322.1-2019: Industrial and Commercial Point Type Combustible Gas Detectors; 

∗ Q/KH 001-2016 Enterprise Standard for Point Type Combustible/Toxic Gas Detector ;

* GB 3836.1-2010: Explosive Atmospheres-Part 1: Equipment-General Requirements;

∗ GB 3836.2-2010: Explosive atmospheres-Part 2: Equipment protected by flameproof enclosures "d".

Product technical indicators:

Detection principle: catalytic combustion type;

Detection gas: combustible gas, please confirm the specific type of gas when purchasing;

Detection method: diffusion type;
Programming mode: infrared remote control (within 3 meters at 30 degrees);

Alarm settings:Low section alarm point 20% LEL,High section alarm Point 50% LEL

Display mode: 4-bit ultra-bright digital tube

Full-range accuracy: ± 5% FS;

Signal output: 4 ~ 20ma signal (detector fault current output 0ma, out-of-range alarm current output 22ma UNK1;

Explosion-proof mode: flameproof;

Temperature range: -40 ℃ ~ + 70 ℃;

Storage temperature: -40 ℃ ~ + 70 ℃ (toxic gas: -20 ℃ ~ + 50 ℃);

Pressure range: 86kPa ~ 106kPa;

Service life of sensor: ≥ 2 years;